|
Purchase an IC-7000 now with included RMK7000
The technical properties and advantages of IF DSP
found in our leading base station modes now offers
its superior advantages on mobile HF, 50MHz,
144MHz and 430/440MHz bands.
Digital IF filter, manual notch filter,
digital twin PBT and more. The latest
digital features are incorporated in
this compact radio from two DSP
chips that deliver superior processing
performance. Of course, those features
work on all ham bands, from
HF to the 70cm band.
You will never experience AGC pumping from a
signal filtered out by the DSP system. The digital
IF filter and manual notch filter are inside the
AGC loop, so you will not encounter AGC blocking.
The AGC time constants are flexibly adjustable
from slow, middle, fast (or AGC-off) for
each operating mode.
All the filters you want at your fingertips!
You will never have to purchase “Optional”
filters as the IC-7000 has adjustable digital
filters. You just dial in the width you want
and select whether you want a sharp or soft
filter shape for SSB and CW modes. Then
to pull-in the the weak ones, with a quick
turn of the concentric twin PBT knobs, you
can either narrow the IF passband, or shift
the entire passband to eliminate the QRM.
Pull out the weak signals in crowded band conditions
with Icom’s NEW two-point MNF (manual
notch filter). Apply 70 dB of rejection to two signals
at once! Notch width is adjustable – wide,
medium, and narrow – and an auto-tuning notch filter is available, too.
Noise reduction reduces background noise and improves signal-to-noise
ratio. The noise reduction level is adjustable in 16 steps. It improves the
readability of voice and data signals.
The noise blanker reduces pulse-type noise such as engine ignition and
sparking. The NB level and width (blanking duration) are adjustable in 100
steps.
High power MOS-FET amps supply 35W output
power on 430/440MHz band as well as 100W on
HF/50MHz bands and 50W on 144MHz. It provides
stable, high quality output with low IMD
and low spurious emissions even during high
duty cycle and extended operation.
The IC-7000 incorporates a high-stability master oscillator, providing
0.5ppm (–0°C to +50°C). A must for data mode operation.
Icom’s original DDS (Direct digital synthesizer)
circuit improves the C/N ratio, providing a clear,
clean transmit signal in all bands.
The IC-7000 sheds 20mm (25/32 in) of depth compared with the IC-706MKIIG. It’s compact body is easy for carrying outdoors or mobile operation.
Eight of the most-used radio functions
such as NB, NR, MNF, and
ANF are controlled by dedicated
function keys grouped around the
display for easy visibility. One quick
touch turns the function on and off.
A longer touch activates adjustment
of the function’s setting.
Record your callsign, CQ, or other information in
4 transmit playback memories with alphanumeric
labels. A total of 90 seconds is available for the
four memories. A front panel REC control allows
you to record incoming signals for up to 25 minutes
(99 channels)*. The DVR makes portable
contesting or mini-expeditions a breeze!
* Up to 120 seconds per channel
The RTTY demodulator and decoder are built-in.
External units and PC are no longer required for
decoding. The twin peak audio filter reduces interfering
signals overlapping the tones and the tuning
indicator helps you zero-in with accurate tuning.
The HM-151 has a 10-keypad for quick channel selection.
The triple band tacking register memorizes the last three
frequencies and modes used on each band. Push the band
button once to three times to recall the channel setting. The
F-1 and F-2 buttons are programmable as shortcut menus of your often used functions.
The 2.5 inch color TFT display presents numbers and indicators in bright,
concentrated colors for easy recognition. You can choose from 3 background
colors and 2 font styles to suit your preference, in addition to a large
operating frequency readout. And more, the Video output jack on the rear
panel allows you to view a magnified display on an external monitor*.
* 3.5(d) mm monaural cable is required for connection.
The SSB transmit bandwidth is selectable from 100, 200, 300, 500Hz at
the high-pass edge, and 2500, 2700, 2800, 2900Hz at the low-pass edge
respectively. 3 types of high and low combinations can be set in the quick
set mode.
The band scope function lets you watch conditions
around the band and visually assists in finding
other stations. In center mode the band scope
range is centered on the receiving frequency
(±10kHz to ±250kHz). In Fixed mode the band
scope sweeps a fixed range.
The IC-7000 displays power level, SWR, ALC
and compression level of the speech compressor.
The SWR graphic display is useful for tuning antennas.
The measuring step is selectable from
10/50/100/500kHz steps and the number of measuring
steps is adjustable from 3 to 13 steps.
- Front panel separation with optional 3.5m/5m separation cable
- Selectable main dial tension from heavy, light and click
- RF speech compressor controlled by the DSP
- CW full break-in
- CW receive reverse
- CW pitch adjustable
- Tone squelch in FM mode
- 503 memory channels
- Built-in voice synthesizer announces operating frequency, mode and signal strength
- Duplex mode and automatic repeater function
- Transmit monitor
- DTMF monitor
- 1Hz tuning
- VOX
- CI-V interface
- RTX
- RF/SQL knob
- Large speaker
- Auto TS function
- Thermo control silent cooling fan
- Noise squelch and S-meter squelch
- Preamplifier
- Dial lock
- 20dB attenuator
The Icom RMK-7000 remote kit for the IC-7000 includes:
- MB-62 Radio Mounting Bracket
- MB-105 Control Head Mounting Bracket
- OPC-1443 Extension Cable for Control Head
|
-Choir Sheet
Antennas - HF
