Save on your favorite Icom Amateur radios from April 1st thru June 30th 2018.
Purchases must be made at an Authorized Icom Dealer.
Impressive audio output volume, long-lasting power, plenty of
memory channels, rugged construction, rich in analog features – the
T70A offers practical 2m/70cm dual band operation and ruggedness, updated for today's ham radio
enthusiasts.
700mW loud audio
The IC-T70A HD users a BTL (bridge-tied load) amplifier that doubles the audio output. Every ham
knows that power = current × voltage. The T70A’s BTL increases the audio output by doubling the
voltage delivered to the speaker. The 36mm large speaker
delivers 700mW of loud and intelligible audio* even in noisy environments.
*Typical value using internal speaker.
Long lasting battery life
Get 5W of power on VHF and UHF in a small, lightweight package. Get up to 19 hours* of operating time with the T70A HD power version, which includes a Li-ion battery pack (BP-265) and rapid charger (BC-193). All that power comes is an easy to hold and use size – not too big, not too small. The T70A Sport version, ideal for long storage or quick back-up, features an AA alkaline battery case instead of a charger/rechargeable battery pack.
* Typical value using internal speaker.
External DC power jack
An external DC power jack allows for operation and charge when used with an external DC
power supply (10-16V DC).*
The BP-265 cannot be charged using the external DC power jack.
A total of 302 memory channels
With 302 alphanumeric memory channels, including 50 band edges and 2
call channels, the IC-T70A HD gives you
flexible scanning lists. With a maximum of 26 memory banks*, you can pick
and choose the desired banks for scanning from the 250 memories.
Up to 100 channels per bank.
Built-in CTCSS/DTCS
CTCSS and DTCS tone codes provide quiet stand-by and allow you to use tone-access repeaters. Pocket beep
alerts you when a matching tone frequency is received. Tone scan detects the subaudible tone that is used
for repeater access.
Internal VOX function
The IC-T70A HD has an internal VOX (Voice Operated Transmit) function for convenient hands-free operation
when used with a compatible optional headset and plug adapter cable. Also, the VOX level and VOX delay time
are adjustable.
IP54 and MIL-STD 810 rugged construction
Dust protection and water-resistance equivalent to IP54 provides
reliable operation for practical outdoor operation. The IC-T70A
HD tested to and passed MIL-STD 810 environmental tests.
Other Features
- WX channel and WX alert function (USA version only)
- Power save function
- SMA type antenna connector
- Automatic repeater function (USA version only)
- 1750 Hz tone for European repeater access
- TOT (time out timer) setting
- Repeater lockout and busy channel lockout
- PC programmable with optional CS-T70
- Transceiver-to-transceiver cloning (Optional)
- Direct keypad frequency entry
- 16 DTMF autodial memories
- Auto power off
- LCD backlight
- Wide/narrow channel spacing
Also available: T70A SPORT featuring AA alkaline power
Perfect for long shelf life use, such as emergency kits. Same output power (5.5/2.5 or 0.5 Watt selectable)
as the standard T70A HD. The T70A SPORT comes with an alkaline tray that will hold 6 AA size batteries*
. No charger required.
*Batteries are not included.
The T70A SPORT radio meets the same military specs and IP tests as the regular
T70A HD radio.
Make the T70A SPORT part of your amateur radio communications plan, for emergency or everyday use.
Specifications
General |
Frequency range (unit: MHz)
Tx
Rx |
144-148,
420-450*1
136-174,
400-479*1
*1guaranteed
144-148 MHz, 440-450 MHz |
Type of emissions |
F2D/F3E (FM) |
Number of memory ch. |
302 (incl. 50 scan edges and 2 call) |
Antenna impedance |
50 Ω (SMA) |
Power supply
External DC power
Battery cells |
7.2V DC (with BP-264)
10-16V DC
6-10V DC
|
Frequency stability |
±2.5 ppm -20°C to +60°C basis of 25°C |
Current drain
(at 7.2V DC or 13.5V DC)
(VHF/UHF, typical) |
Tx
Rx
|
High (UHF/VHF)
Max. audio
Stand-by
Power saved |
1.7 A/2.1 A typical
Less than 450mA (internal SP, 16Ω)
Less than 300mA (External Sp, 8Ω)
Less than 90mA
Less than 40mA (1:8 duty) |
|
Operating temperature range |
-20°C to +60°C
-4°F to +140°F |
Dimensions
(projections not included) |
58(W) × 111(H) × 30(D) mm
29⁄32(W) × 43⁄8(H) ×
13⁄16(D) in
|
Weight |
380g; 13.4oz (with BP-264 and Ant.)
|
Transmitter |
Output power (at 7.2 V DC)
|
5.0W/2.5W/0.5W (high/mid/low) |
Spurious emissions |
Less than -60 dBc (high/mid)
Less than -13dBm (low) |
Max. freq. deviation |
±5 kHz/±2.5 kHz (wide/narrow) |
Ext. MIC connector
|
3-conductor 2.5(d) mm (1⁄10″)/2.2kΩ |
Receiver |
Sensitivity (at 12dB SINAD) |
0.18 µV (guaranteed range) |
Squelch sensitivity (at threshold) |
0.18 µV typical |
Selectivity
FM
FM narrow |
More than 60dB
Less than 60dB |
Spurious and Image rejection ratio |
More than 60dB (VHF) |
Audio output power (at 10% distortion) |
More than 700mW (internal SP, 16Ω
More than 400mQ (external SP, 8Ω |
Ext. SP connector |
3-connector 3.5 (d) mm (1⁄8″)/8Ω |
Applicable U.S. Military Specifications and IP Rating
Standard
|
MIL 810F |
Method |
Proc. |
Temp. Shock
|
503.4 |
I |
Rain |
506.4 |
I, III |
Vibration |
514.4 |
I |
Shock |
516.5 |
I, IV |
Also meets equivalent MIL-STD-810-C, -D and -E. Other test categories are now under evaluation.
Ingress Protection Standard |
Dust and Water |
IP54 (dust-protection and water resistant) |
All stated specifications are subject to change without notice or obligation.
Supplied Accessories
- Antenna, FA-S270C
- Belt clip, MB-124
- Battery pack, BP-264
- Wall charger, BC-167S*
- Hand strap
*Depending on version
Options
- BP-263 BATTERY CASE
Battery case for AA (LR6) × 6 alkaline cells.

- BP-264 BATTERY PACK
7.2V/1400mAh Ni-MH. Provides 10-11.5 hours operating time (approx.).

- BP-265 BATTERY PACK
7.4V/1900mAh (min), 2000mAh (typ.). Provides 13.5-16 hours operating time (approx.).
- BC-192 DESKTOP REGULAR CHARGER + BC-147S AC ADAPTER
Charges to BP-264 in 2 hours (approx.).

- BC-191 DESKTOP RAPID CHARGER + BC-123S AC ADAPTER
Charges the BP-264 in 2 hours (approx.).
- BC-193 DESKTOP RAPID CHARGER for BP-265 + BC-123S AC ADAPTER
Charges the BP-265 in 2.5 hours (approx.). BC-123SA/BC-147SA for 120V AC. SE
for 230V AC. SV for 240V AC.

- MB-130 VEHICLE CHARGER BRACKET
Bracket firmly holds a single rapid charger to allow battery charging while in a vehicle.
The first image depicts the standalone MB130. The two subsequent images portray the bracket holding two
different radios / charging cups.
Items required:
1. Charger - BC-160, BC-190, BC-19, BC-192 or BC-1932
2. Bracket - MB-130
3. Power - CP-17L
- CP-19R CIGARETTE LIGHTER CABLE
Cigarette lighter cable for external power operation. DC-DC converter built-in.
- CP-12/L* CIGARETTE LIGHTER CABLE
Cigarette lighter cable with noise filter for external power operation.
*The BP-265 cannot be charged using the external DC power jack.

- CP-23L CIGARETTE LIGHTER CABLE
Cigarette lighter cable for use with the BC-191 or BC-193.
- OPC-254/L* DC POWER CABLE
DC power cable for external power operation.
*The BP-265 cannot be charged using the external DC power jack.

- OPC-515L DC POWER CABLE
DC power cable for use with the BC-191, BC-192 or BC-193.
- HM-153 SPEAKER-MICROPHONE
Durable earphone-microphone.
- HM-131 COMPACT SPEAKER-MICROPHONE
Compact and durable body with a revolving clip.
- SP-27 EARPHONE
Acoustic tube earphone with clothing clip.
- HS-94 HEADSET
Earhook headset with flexible boom microphone.
- HS-95 HEADSET
Behind-the-head headset flexible boom microphone.

- HS-97 HEADSET
Throat microphone that fits around your neck and picks up speech vibrations.

- OPC-2006 PLUG ADAPTER CABLE
Required when using any of these headsets.
- BC-167S* WALL CHARGER for BP-264
Charges the BP-264 in 8 hours (approx.). Same as supplied with some versions.
*BC-167SA for 120V AC. SE for 230V AC. SV for 240V AC.
- CS-T70 CLONING SOFTWARE + OPC-478/UC CLONING CABLE
Provides quick and easy programming of memory channels, memory
names. OPC-478UC is a USB cable type.

- LC-174 CARRYING CASE
Helps protect the transceiver from scratches, etc.
- FA-S270C VHF/UHF ANTENNA
Same as supplied.

- MB-124 BELT CLIP
Alligator type clip. Same as supplied.
- AD-92SMA ANTENNA CONNECTOR ADAPTER
Allows you to connect a BNC-type antenna.
- OPC-474 CLONING CABLE
Used for receiver-to-receiver data cloning.

IC-T70A HD Users Manual