DJ-G7T
Full Duplex Tri-Bander meets the needs of the most demanding Ham!
Loaded with features the DJ-G7 includes:
- Simultaneous full duplex operation of any two bands 144MHz, 430MHz, 1200MHz
- Internal VOX
- Large LCD full dot matrix screen with easy to see and understand display
- Polycarbonate body ergonomically designed to fit the palm of your hand.
- Die-cast chassis for rugability and to keep the RF-PA cool.
- Twin "user assignable" controls with easy to use knobs for adjusting AF output and Squelch levels.
- 39 CTCSS and 104 DCS encode/decode. Tone scan to detect unknown tones.
- DTMF Auto-dialer for autopatch access. Up to 16 characters per group in 9 groups.
- SMA antenna port for external antenna use.
- Auto Power-Off, Bell, End-beep, Battery Save function, BCLO and more
- Newly designed EBC-23 Swing belt clip
- High-Capacity EBP-73 Li-ion 1200mAh battery and Drop-In charger are standard.
- External DC power port supports 13.8V DC for mobile operation.
- Auto-repeater* and conventional repeater operation * For USA repeater system
- 1000 Memory Channels with programmable memory banks
*PC and ERW-4C or ERW-7/EDS-10 or EDS14 required for bank programming
SPECIFICATIONS
General
|
Frequency range:
|
E-version TX/RX: 144.000 - 145.995MHz / 430.000 - 439.995MHz / 1240.000 - 1299.995MHz
AM/FM/TV(analog) broadcasting bands
T-version TX: 144.000 - 147.995MHz / 430.000 - 449.995MHz / 1240.000 - 1299.995MHz
Sub-band RX: 0.530 -1299.995MHz
(Cellular frequencies 824.000 - 849.995MHz, 869.000 - 894.995MHz blocked on T-version )
|
Modulation:
|
TX: F2D/F3E (RX only:WFM,AM)
|
Memory channel:
|
1000 channels + 1 call channel per ham bands+50 programmed-scan pairs+100 dual-memory+100 priority+100 serch-pass
|
Antenna impedance:
|
50 ohm unbalanced
|
Frequency stability:
|
+/- 2.5ppm
|
Supply voltage:
|
DC 7.4V (EBP-73 Li-Ion battery pack) / DC 4.5 - 16V (external regulated source)
|
Current consumption: (Typical value)
|
TX approx. 1.6A/144MHz, 1.8A/430MHz, 0.8A/1200MHz
RX approx. 200mA
Battery save (1:4) approx. average: Dual 56mA / Single 50mA
|
Temperature range:
|
-10 to +45 degrees C. (+14 to 113 F)
|
Ground:
|
Negative
|
Dimensions:
|
(WxHxD Projections exclusive): 60 x 115 x 30 mm or 2.36 x 4.53 x 1.18 in.
|
Weight:
|
(Antenna/EBP-73 inclusive): Approx. 296 g /9.55 oz
|
Transmitter
|
Power output: (Approx.value)
|
DC13.8V: 144MHz/430MHz 5/2/1/0.3W,1200MHz 1/0.3W
EBP-73: 144MHz 5/2/0.8/0.3W, 430MHz 4.5/2/0.8/0.3W, 1200MHz 1/0.3W
4 x AA cells (Max): 144MHz 2W, 430MHz 1.5W, 1200MHz 0.5W
|
Modulation:
|
Variable reactance
|
Spurious emission:
|
-60db or less
|
Max. Deviation:
|
+/- 5kHz
|
Mic. impedance:
|
2K ohms
|
Receiver
|
System:
|
Double-conversion super heterodyne (NFM,AM)
Single-conversion super heterodyne (WFM)
|
Sensitivity:
|
144/430MHz ham-radio bands -15dBu or better
1200MHz ham-radio band -13dBu or better
Sub-band receiver (Best values):
AM (10dB S/N):
Lower than 50MHz -1dBu
50MHz and above -6dBu
FM (12dB SINAD):
30-470MHz -15dBu
470MHz and above -7dBu
WFM
76-470MHz -6dBu
470MHz and above -3dBu
|
Intermediate frequency:
|
Main-band FM 51.65MHz / 450KHz
Sub-band AM/FM 50.75MHz / 450KHz
Sub-band WFM 10.7MHz
|
Selectivity:
|
AM/FM -6dB 12KHz or more / -60dB 35KHz or less
WFM -6dB 130KHz or more / -60dB 300KHz or less
|
AF output:
|
400mW (8ohm 10%THD)
|
Specifications subject to change without notice or obligation. Specifications apply to Amateur Radio bands only. Permits required for MARS use. Product intended for use by properly licensed operators. Wide band receive related specification is for T-version only.800MHz cell-phones frequencies blocked on T version. RoHS compliant.
|
|
ACCESSORIES
|
STANDARD
- EBP-73 Li-Ion Battery Pack 1200mAh 7.4V
- EDC-173T Drop-In Charger (120V/T-version)
- EDC-173E Drop-In Charger (240V/E-version)
- EA-163 Antenna
- EBC-23 Beltclip
- Handstrap
(Please be advised that EDH-35 dry-cell case is not included in T and E packages.)
OPTIONAL
- EDC-36 ------------ Cigarette Cable with filter
- EDC-43 ------------ Cigarette Cable with charger
- EDH-35 ------------ Dry Cell Case
- EDS-10/EDS-14 --- Plug Conversion Cable
- EDS-11 ------------ Cloning Cable
- EME-32A ---------- Earphone/Mic (heavy duty)
- EMS-62 ------------ Speaker Mic
- ERW-4C ----------- PC Interface Cable (Serial)
- ERW-7 ------------- PC Interface Cable (USB)
- ESC-50 ------------ Soft Case
Accessories may differ depending on the versions. Please contact your dealer for standard accessories and warranty-policy.
|
|