The MFJ-9406X comes with both the MFJ-9406 and the MFJ-290 microphone.
Work exciting 6 Meter DX from all over the world on ham radios "magic band"!
Its an adventure every time you turn on your MFJ-9406 six meter SSB transceiver.
Distant stations come rolling in loud and clear with crystal clean armchair copy. You`ll have fun exploring exotic 50 MHz band openings -- Tropo, Sporadic E, F2, TE, Aurora, Meteor Scatter, and more.
Ragchew with locals, hunt down new grid squares from far-away places from home, car or mountain top.
Here`s what you get...
Easy to Operate: No microprocessor mumbo-jumbo. Just turn on and tune in!
Potent Signal: 10-Watt PEP--plus Constant CurrentTM syllabic speech processing for an
added 4 to 6-dB advantage to cut through noise, fading, and QRM.
Hot Receiver: 1.5-dB NF preamp and active-DBM front end dig deep into the noise to
capture weak ones. If a signal is there, you'll hear it.
Full SSB/CW coverage: 50.0 - 50.3 MHz covers SSB, CW, propagation beacons.
Hot receiver: Crystal-mixed single conversion superhet with low-noise preamp digs deep into the noise to capture weak signals. If a station is there, you'll hear it!
Low power drain: Mountain top all day on lightweight NiCad or operate from home on 110 VAC MFJ-4110. All-analog circuitry means highest energy efficiency.
Great selectivity: Sharp HF proven crystal ladder filter reduces QRM & pass band noise.
TVI protection: 7 element low pass filter knocks out TVI -- operate when you want to!
Real S-Meter: Give meaningful signal reports, accurately steer your beam, monitor speech processing.
Smooth tuning: Vernier reduction drive makes tuning precise and easy.
External amplifier: Jack provides a key line for activating 6 Meter amplifiers.
Built to last: Premium PC board, quality components, brushed-aluminum panel and tough vinyl clad case gives years of service.
Frequency Coverage: 50.000-50.300 MHz
Receiver Type: Single-conversion Superhet
Frequency Control: Heterodyne VFO, low-side injection
IF Frequency: 10 MHz
IF Selectivity: -6 dB @ 2.5 KHz
AGC: Audio-derived, 70-dB dynamic range
Sensitivity: .15 uV for 12-dB S/N
Audio: 1-Watt into 8 Ohms at 10% THD
Average Rx Current: 60-mA, (S-meter lamp disabled)
RF Power Output: 10-Watts PEP
VSWR Tolerance: 3:1 VSWR maximum
Peak Tx Current: 2.0 A
Speech Enhancement: RF-compression, syllabic rate
Spurious Attenuation: 60-dB
CW Generation: 600-Hz tone (optional generator)
Mic Input: 600-Ohm dynamic
Fully guaranteed: MFJs exclusive one year No Matter What warranty. We will repair or replace your MFJ-9406 for 1 full year.