* After $200 Mail in Rebate
Amateur Spring Savings

Save on Icom Amateur Radios
Save on your favorite Icom Amateur radios from April 1st thru June 30th 2018.
Purchases must be made at an Authorized Icom Dealer.
Multi-band, All Mode Operation at Your Fingertips!
In 1995, almost two decades ago, Icom has changed the way hams think about mobile HF communication with their introduction of the
IC-706. Since that time, the Icom Mobile HF radios have been the Performance HF mobile radio of choice. Now, at the 2012 Tokyo Hamfair,
Icom has once again changed mobile HF communications with the introduction of the IC-7100.
Touch Screen Control Portal
An amateur radio first!
The radio control head features a large, multi-function, "touch
screen"' DOT-Matrix LCD display that is positioned for easy view
and operation. This is an important feature as the controller display
not only provides information, but is your control portal to the
IC-7100's feature settings and menus.
Control Head
Breaking the the concept that a radio panel should be
flat, the IC-7100's control head is designed for an optimal view
angle for the LCD as well as the spacing for large fingers, and
plenty of room to have a large internal speaker along with a CW
keyjack, phone/speaker, microphone *, and control cable.
*Shown with Optional HM-151 microphone
D-STAR READY*
The IC-7100 provides D-STAR DV mode digital voice and low speed data communication.
(*No info on operations bands beyond 2m/70cm)
D-STAR: Digital Smart Technology for Amateur Radio
IF DSP features
The latest 32-bit floating point DSP supports many digital processing features such as digital IF filter,
twin PBT, manual notch filters. Of course, those highgrade digital processing features work on all ham
bands, from HF to the 70cm band.

Other features
- Built-in SD Card Slot for voice storage and data cloning
- Dual DSP chips deliver versatile digital processing
performance
- Built-in RTTY demodulator and decoder
- Multi-function meter
- SWR graphic display
- DSP controller RF speech compressor
- Total of 505 memory channels
- Voice recording and playback functions
- 70–70.5MHz coverage, 50W output power (for Europe versions
only, varies according to version.)
- ± 0.5ppm high frequency stability
- Optional RS-BA1 IP control remote control software
Supplied accessories
- HM-198 Hand Microphone -- (No Numeric keypad)
- DC power cable
- Electronic keyer plug
- Spare fuses
- Key plug
- ACC cable
- OPC-2253 Separation cable (3.5m)
Optional Accessories:
- OPC-2254 Separation Cable (5.0m)
- MBA-1 Controller Bracket
- CS-7100 Programming Software
- MBF-1 Controller base
- HM-151 Hand Microphone, Mobile, Illuminated DTMF Keypad, 8-pin Modular, RJ45 Connector
Back panel
Specifications
General |
Frequency coverage
(MHz)
Receiver
Transmit |
0.030 - 199.999 |
|
400.000 - 470.000 |
|
|
1.800-1.999 |
|
3.500-3.999 |
|
5.255-5.405 |
7.000-7.300 |
|
10.100-10.150 |
|
14.000-14.350 |
18.068-18.168 |
|
21.000-21.450 |
|
24.890-24.990 |
28.000-29.700 |
|
50.000-54.000 |
|
144.000-148.000 |
430.000-450.000 |
|
|
|
|
*1 Showing USA Version. Varies according to version.
*2 Some frequency bands are not guaranteed. |
Mode
|
USB, LSB, CW, RTTY, AM, FM, WFM (Rx only)
|
No. of memory channels
|
505 (495 regular, 6 scan edges and
4 call) ; 700 (D-STAR repeater channels |
Antenna connector
|
SO-239×2
(one
each for HF/50 MHz and VHF/UHF bands, 50Ω)
|
Temperature Range
|
-10°C to +60°C;
+14°F to +140°F
|
Frequency stability
|
Within ±0.5 ppm (+0°C to +50°C; +32°F to +122°F) |
Power supply requirement
|
13.8V DC ±15% |
Power consumption
(approx.) |
Tx
Max. Power
Rx
Max. Audio/Standby
|
22.0A
1.5A/1.2A
|
|
Dimensions (W×H×D)
(projections not included)
|
RF Unit
167x58x255 mm
Controller 165x64x78.5 mm |
Weight (approx.) |
RF Unit
2.3kg
Controller 0.5kg |
Transmitter |
Output power (at 13.8V DC)
|
|
HF/50MHz |
144MHz |
430/440MHz |
SSB/CW/RTY/FM/DV |
2-100W |
2-50W |
1-35W |
AM |
1-40W |
- |
- |
|
Spurious emissions
|
Less than -50dB (HF bands)
Less than -63dB (50MHz)
Less than -60dB (144/430MHz) |
Carrier suppression |
More than 506dB
|
Unwanted sideband suppression |
More than
50dB |
Receiver |
Intermediate frequencies
SSB, CW, RTTY, AM, FM
WFM
|
124.487 MHz, 455 kHz,
36kHz
134.732 MHz, 10.70 MHz |
Sensitivity (Pre-amp: ON)
|
|
0.5-1.8 MHz |
1.8-29.9 MHz |
50-54 MHz |
144/430 MHz |
SSB/CW/RTTY |
— |
0.16µV |
0.13µV |
0.11µV |
AM |
13.0µV |
2.0µV |
1.0µV |
1.0µV |
FM |
0.5µV
(28-29.7)
|
0.5µV
(28-29.7)
|
0.25µV |
0.18µV |
DV |
1µV(28-29.7) |
.63µV |
.35µV |
WFM |
– |
– |
10.0µV (76-108MHz) |
|
Selectivity
SSB (BW=2.4kHz, sharp)
CW (BW=500Hz, sharp)
RTTY (BW=350Hz)
AM (BW=6kHz)
FM (BW=15kHz)
DV (12.5kHz spacing)
|
(representative value)
More than 2.4 kHz/–6dB
Less than 3.6kHz/–60dB
More than 500 Hz/–6dB
Less than 900 Hz/–60dB
More than 360 Hz/–6dB
Less than 650 Hz/–60dB
More than 6.0 kHz/–6dB
Less than 15 kHz/–60dB
More than 12 kHz/–6dB
Less than 20 kHz/–60dB
-50dB |
Spurious and image
rejection ratio |
More than 70dB (HF bands)
More than 65dB (other bands)
(except 144MHz
IF point)
|
AF output power
(at 13.8V DC)
|
More than 2.0W at 10% distortion with an 8Ω load |
All stated specifications are subject to change without notice or obligation.
READ ALL INSTRUCTIONS carefully and completely before using the transceiver.
# - CHS-IC-7100 #
|